$50
Now $39 (20% OFF)
DIESEL HYDRONIC HEATING SCHEMATIC
AIR MATRIX + WATER HEAT EXCHANGER
+ UNDERFLOOR HEATING
Get instant access to the full set of our Eberspacher D5E Diesel hydronic heating system wiring + plumbing schematics. Installed in our campervan conversion to heat our air with an air matrix, the floor with a radiating underfloor heating line, and the water via a heat exchanger.
this guide is suitable for
Instant Download
Get instant lifetime access to the detailed hydronic heating schematics with all diagrams and drawings.
Detailed Guidance
Detailed wiring and plumbing Hydronic D5E Diesel Heater schematics – bonus notes included.
Updates + Support
Need more advice? Ask us. Schematics include upgrade ideas + alternative options to help match your needs.
How we used the templates?
what is inside the BUNDLE?
35 PAGES OF WIRING AND PLUMBING SCHEMATICS
Detailed schematics in a 35-page bundle detailing the wiring of an Eberspacher D5E Diesel Hydronic Heater and a Silencio 2 Air Matrix, and the glycol loop plumbing as we have done on our DIY system. See a close-up diagram of a water heat exchanger plumbing for instant hot water in your campervan shower. Controller wiring explanation and a close-up of the radiant underfloor heating plumbing.
saves hours and money
This resource will save you hundreds of hours of research time, and hundreds of pounds in wasted material costs (like it did for us).
removes guesswork
No more guessing about which wire goes where and how to simply plumb your glycol loop to get instant hot water and hot air in your campervan.
I’m really impressed with your diagrams, they are so neat and easy to follow. Your hydronic heating system is the most straightforward set up I have seen, can’t wait to install this into my campervan.
I searched and searched for clear explanations on how to do my campervan heating that will do instant hot water and air heating – thank god for yours. Love the detail and the extra support.
Really useful plans much easier to follow than the ones provided by eberspacher backed up with great videos and even help by email. Highly recommended
Used your plans for your hydronic heating and thanks so much for all the extra detail. I followed all your steps and made adjustments for my layout and It is working awesome. Can’t believe I have underflooring heating in my campervan!!!
Hello Sam,
Thank you for answering my many questions. Very impressed with your attention to detail. You should be very proud of your work.
Super, cheers, I can’t recommend Freedom Strider and their work enough. Love the innovation and the hydronic heating schematics are a fantastic baseline for the system with minimal maintenance.
TOOLS AND MATERIALS
Every tool and material we used in our own build, are listed and linked. Allowing you to quickly find what you need and discover alternatives.
Random Van Build Wisdom
As an added BONUS we’ve included some tips and tricks of wisdom we wish we knew before we started. This will help you design and build – while dodging some of the most common pitfalls.
un-restricted support ticket
We are able to provide a lot of extra details and tips, that didn’t make the cut into the guide, but if you need them you can message us. The guide answers a lot of questions, but if it does its job correctly, it will raise many too. So let us know and we’ll do our best.
what’s the deal?
$39
with lifetime access!
35 pages
there is so much to learn!
UNLIMITED
lifetime updates and support!
⬇ Grab 20% OFF below ⬇
⬇ 20% OFF ⬇
FAQ
What are the Hydronic Heating Schematics?
Detailed schematics in a 35-page bundle detailing the wiring of an Eberspacher D5E Diesel Hydronic Heater and a Silencio 2 Air Matrix, and the glycol loop plumbing as we have done on our DIY system. See a close-up diagram of a water heat exchanger plumbing for instant hot water in your campervan shower. Controller wiring explanation and a close-up of the radiant underfloor heating plumbing.
How does it work?
1) GET ACCESS 📧
Within seconds of purchasing, you’ll receive an email in your inbox with your instant PDF download. Get Instant Access!
2) EXPLORE 📚
The next step is to have a read-through, find the tools and materials you need and make decisions on what you need to modify for your own camper design. Then follow the steps as needed.
3) PRINT 🖨️
Print the bundle, or just the pages you need and start designing your own system.
4) GET SUPPORT 🤝
No matter how many questions we answer, there will always be more. If you get stuck or you need a specific detail (omitted from the schematic) then all you have to do is ask us. If you need more help, feel free to contact us via email or Book a Van Build Chat.
How much does it cost?
We think the reason so many people have been asking this question is that it sounds like it should cost a tonne! But… it doesn’t. 😉 That’s because we recognize that a lot of people in our community, aim to do their van conversions on a budget.
So, while the value of a Hydronic Heating Schematics is well over $300 in hours of research time, we’ve chosen to offer it all for just $39.
We aren’t planning to ever offer it at this crazy-low price again, so grab the deal now…
Who's it for?
Let me start by saying… it’s not for everyone. The Hydronic Heating Schematics are for motivated do-it-yourselfers who are not professionals in hydronic diesel heating systems. Who need help understanding all the different components that come in most standard kits.
The schematics are for people who like to wake up in the morning, of a big building day, and know what to expect from the tasks ahead.
If this sounds like you, then this schematic can really save you time and money and get you travelling the world that much sooner. 🌍 Get Instant Access!
It might NOT be the best fit for you if you enjoy just winging it, you don’t find if you blow a fuse or cause a minor explosion, or you’re happy reading the 60+ page complicated document issued by the manufacturer and scouring the internet for drips of detail.
Building anything meaningful (and sustainable) takes time, and converting a van to a campervan is no exception. We want a community of people who recognize this and are committed to their dreams of freedom.
The #1 reason you should get the Schematics
You have BIG dreams and you’re ready to take action and make them happen. But getting started can be tough — especially when you don’t know WHERE to even begin. The Hydronic Heating Schematics gives you clear Action Plans and the Starter Kit tools you need for success. 🥳
What are these schematics suitable for?
The schematics are most accurate for an Eberspacher D5E Diesel Hydronic heating system. Schematics depicted a 2-pipe system with a water heat exchanger, a Silencio 2 air matrix and an underfloor heating loop. If you need more help, feel free to contact us via email or Book a Van Build Chat.
Can I get a refund?
We stand behind our products and your satisfaction with them is important to us. However, because our products are digital goods delivered via internet download and available for instant access we typically do not offer refunds.
Refund requests made after you have downloaded our product are handled on a case by case basis and are issued at our sole discretion.
The chapters
HYDRONIC WIRING
INSTALLATION SCHEMATICS
HYDRONIC PLUMBING
INSTALLATION SCHEMATICS
AIR MATRIX WIRING
